Our project · International
Aluminum Soffits, Column Covers & Canopies in Miami
Aluminum and ACP soffits, column covers, fascias and entrance canopies matched to the facade, for commercial buildings in Miami.
- Materials
- ACP, plate or HPL
- Columns
- Round or square covers
- Canopies
- Framed & drained
- Design
- Wind uplift engineered
About soffits, column covers & canopies
The surfaces people see up close are often the ones left to the end: the soffit over the entrance, the columns in the lobby, the canopy at the drop-off. We finish them in the same panel system as the facade so every visible metal surface matches.
Soffits and canopies in South Florida also have to resist wind uplift and shed water, so we engineer the framing and drainage along with the finish. In cladding and facades we cover the full scope: design, fabrication, supply and installation, with installation carried out by licensed and insured partner crews.
Our project · InternationalAnatomy of soffits, column covers & canopies
- Column coversTwo- or four-piece covers in ACP or plate, with concealed joints and access for inspections.
- Soffit panelsOverhead panels on suspended framing, designed for wind uplift and vented where needed.
- Fascias and bandsHorizontal bands that cap slab edges and parapets and frame the facade.
- Canopy structureSteel or aluminum framing clad in panels or glass, with integrated gutters and downspouts.
- Access and lightingCutouts for lights, sprinklers and access panels planned in the panel layout.
Facades that perform in sun, salt air and hurricane winds.
Performance standards
Cladding in South Florida is judged on fire safety, wind resistance and how its finish survives the sun. These are the standards behind our systems.
NFPA 285 · Fire propagation
Full-scale fire test for exterior wall assemblies that contain combustible components, typically required on buildings over 40 ft. The whole assembly is tested, not just the panel.
ASTM E84 · Surface burning
Flame spread and smoke development; exterior panels are typically specified Class A.
AAMA 2605 · Coating performance
The highest architectural coating standard (70% PVDF resin), including 10 years of South Florida exposure testing for color and gloss retention.
ASTM E330 · Wind load
Panels, fixings and sub-framing are designed and tested for the project's wind pressures, including corner zones.
Miami-Dade NOA / FL Product Approval
Approved wall-cladding systems for permitting in the HVHZ (Miami-Dade and Broward) and the rest of Florida.
AAMA 508 / 509 · Rainscreen
Test standards for pressure-equalized and drained, back-ventilated rainscreen cladding.
Code references are summarized for orientation. Final requirements are confirmed by the engineer of record and the building department for each project.
Design considerations
What our engineering team reviews with the design team before the drawings are final.
- Uplift is the governing loadSoffits and canopies see high uplift at corners and edges. Fixings are designed for it.
- Coordinate the servicesLighting, sprinklers and cameras are located before panels are cut.
- Match the facadeUsing the same panel system and finish as the walls keeps the building consistent.
- Drain the canopyCanopies are detailed so water drains away from entrances and does not stain the facade.
Cladding materials compared
A quick reference our engineers use with architects and owners when choosing the right system.
| ACP (4 mm composite) | Solid aluminum (2-3 mm) | Compact HPL (6-10 mm) | |
|---|---|---|---|
| Construction | Two 0.5 mm aluminum skins on an FR or A2 mineral core | Single aluminum sheet, folded and stiffened | Layered fibers and resin, decorative UV-resistant surface |
| Weight | About 1.6 psf | About 1.1-1.7 psf | About 1.8-2.9 psf |
| Fire | FR or A2 core, NFPA 285 tested assembly | Non-combustible panel | Fire-retardant grade, tested assembly |
| Shapes | Flat, routed folds, gentle curves | Curves, deep returns, perforation, 3D | Flat panels, slats, battens |
| Finishes | PVDF solids, metallics, wood and stone looks | PVDF, anodized, metallic, textured | Wood grains, stone, solid colors |
| Best for | Large flat facades at a competitive cost | Signature and coastal architecture | Warm, natural looks with low maintenance |
What we supply
One package from design-assist to closeout, so there is one team accountable for the result.
- Column covers, round or square
- Exterior and interior soffits
- Fascias, bands and parapet caps
- Entrance canopies with framing and drainage
- Engineering for wind uplift
- Installation management with licensed and insured partners
Options & specifications
Final systems, glass and finishes are confirmed per project in shop drawings and submittals.
| Material | ACP, solid aluminum plate or HPL |
|---|---|
| Finish | Matched PVDF, metallic or wood-look |
| Canopies | Panel-clad steel, glass-topped or aluminum |
| Details | Integrated lighting cutouts, gutters and access panels |
From plans to closeout
- Plans reviewSend drawings and specs. We review the scope, the wind zone and the code path, and list any questions.
- ProposalA priced proposal with the system, glass and finish, plus value-engineering options where they help budget or lead time.
- Engineering & approvalsShop drawings, structural calculations by a Florida-licensed PE, product approvals and samples for the architect's review.
- FabricationSystems are fabricated to the approved drawings and delivered to suit the site schedule.
- InstallationInstallation by licensed and insured partner crews, with our project manager on site. The permit is pulled by the contractor of record.
- CloseoutPunch list, warranties, as-builts and maintenance information handed over.
Our project · InternationalOur project · International
Our project · International
Soffits, Column Covers & Canopies: FAQ
Can you match an existing facade color?
Yes. We match from the building, a sample or a manufacturer's color code, and submit a sample panel for approval.
Do canopies need separate engineering?
Yes. Canopies carry wind uplift and sometimes signage or lighting, so they are engineered with their connections to the structure.
Can you clad existing columns?
Yes. Column covers are made to fit existing columns, which is a fast upgrade in lobbies and arcades.
Can a canopy have glass?
Yes. Glass canopies use laminated glass on steel or stainless supports, with drainage designed in.
Request a Soffits, Column Covers & Canopies quote
Send the scope, drawings or a link to the bid set. We review it and reply with questions, a system proposal or a price.
- Free, no-obligation quote or bid
- Value-engineering options included
- Scope review by our technical team
- One point of contact from bid to closeout
Prefer to talk to our estimating team?