We specialize in aluminum facade cladding from design to installation: 4 mm ACP aluminum composite panels, 2-3 mm solid aluminum plate, louvers, soffits and canopies, engineered on rainscreen sub-framing for new buildings and for renovating aging malls, retail centers and hotels across Miami and South Florida.
ACP aluminum composite panels and 2-3 mm solid aluminum cladding: design, fabrication, supply and installation.
Two aluminum skins bonded to a fire-retardant or non-combustible core. ACP cladding delivers large flat panels, crisp routed corners and hundreds of colors at a competitive cost per square foot, with panels from leading manufacturers such as Alucobond or Reynobond selected to the project's fire code.
Full technical guide: ACP Aluminum Composite Panels
Our project · InternationalA single 2-3 mm aluminum sheet, folded and stiffened, for facades that need non-combustible panels, curves, perforation or deep returns. Solid aluminum cladding is the durable choice for coastal buildings and signature architecture.
Full technical guide: Solid Aluminum Plate Cladding
Aluminum louvers, vertical fins and sunshades that cut glare and solar heat gain, screen parking and rooftop equipment and give the facade depth and rhythm.
Full technical guide: Aluminum Louvers, Sunscreens & Fins
Our project · InternationalColumn covers, soffits, fascias and entrance canopies in the same panel system as the facade, so every visible metal surface matches, engineered for wind uplift.
Full technical guide: Soffits, Column Covers & CanopiesFinal systems, glass and finishes are confirmed per project in shop drawings and submittals.
| Panel types | ACP 4 mm (FR or A2 core) · solid aluminum 2 mm / 3 mm |
|---|---|
| Fixing systems | Concealed cassette, route-and-return, riveted or screw-fixed |
| Substructure | Aluminum rails and brackets with thermal isolation, ventilated cavity |
| Finishes | PVDF (Kynar-type), powder coat, anodized, metallic, wood and stone looks |
| Fabrication | CNC routing, folding, perforation, curving to shop drawings |
| Code | FR or A2 core and an NFPA 285-compliant wall assembly where the Florida Building Code requires it (typically above 40 ft); wind-load design per project |
Our project · InternationalOur project · InternationalACP is two thin aluminum skins around a core, light and economical for flat panels. Solid aluminum plate is a single 2-3 mm sheet, non-combustible and better for curves, perforation and high-exposure facades.
Yes. We specify FR or A2 (limited-combustibility) cores and confirm that the complete wall assembly meets NFPA 285 where the code requires it.
Most panel brands offer custom PVDF colors. We submit samples for the architect's approval before production.
Yes. In cladding and facades we cover the full scope: our engineering team designs the system and panel layout, panels are fabricated to the approved drawings, and installation is carried out by licensed and insured partner crews.
Send the scope, drawings or a link to the bid set. We review it and reply with questions, a system proposal or a price.
Prefer to talk to our estimating team?