Back-Painted, Fluted & Textured Glass in Miami
Back-painted glass wall cladding, fluted and textured glass, writable glass and mirrors for lobbies, elevators and amenity floors in Miami.
- Colors
- Any RAL or matched
- Glass
- Low-iron for true color
- Textures
- Fluted, reeded, etched
- Use
- Walls, cabs, boards
About back-painted & textured glass
Back-painted glass gives a deep, glossy color with a surface that is easy to clean and does not stain. Fluted and textured glass add light and privacy with a soft, tactile look that is very current in hospitality design.
We supply glass wall cladding, writable glass boards, fluted partitions and mirrors, cut to size with polished edges and installed with the right adhesives and fixings.
Our project · InternationalAnatomy of back-painted & textured glass
- Back-painted glassPaint applied to the back face, viewed through the glass for a deep, glossy color.
- Low-iron substrateClear low-iron glass so whites and light colors stay true.
- Fluted and textured glassRolled or cast patterns that diffuse light and add privacy.
- Writable glassBack-painted glass used as a whiteboard surface that does not ghost.
- Adhesives & fixingsPaint-compatible silicones, mechanical clips or channels.
Glass that is measured, made to size and installed to a commercial standard.
Performance standards
Architectural glass is chosen by safety, strength and clarity. These are the standards and glass types behind our doors, walls, showers and mirrors.
CPSC 16 CFR 1201 / ANSI Z97.1
Safety glazing standards for glass in doors, showers, sidelights and other hazardous locations.
ASTM C1048 · Heat-treated glass
Fully tempered glass is about four times stronger than annealed glass and breaks into small, blunt pieces.
ASTM C1172 · Laminated glass
Two or more plies bonded by an interlayer that holds the glass in place if it breaks; used where retention matters.
ASTM C1503 · Mirrors
Quality standard for silvered mirror glass, with edge sealing and compatible adhesives for long life.
ANSI/BHMA A156.10 / A156.19
Standards for power-operated sliding doors and low-energy automatic swing doors.
Accessibility (ADA / FBC)
Clear opening width, low thresholds and limited opening force on accessible doors.
Code references are summarized for orientation. Final requirements are confirmed by the engineer of record and the building department for each project.
Design considerations
What our engineering team reviews with the design team before the drawings are final.
- Flat substrateWalls must be flat and dry; we specify the substrate and tolerances.
- CutoutsOutlets, switches and fixtures are measured before cutting, since glass cannot be cut on site.
- Tempered where neededBehind cooktops and in high-impact areas, glass is tempered.
- JointsJoint layout is planned so lines align with doors and ceilings.
Our project · InternationalGlass types compared
A quick reference our engineers use with architects and owners when choosing the right system.
| Annealed | Heat-strengthened | Fully tempered | Laminated | Low-iron | |
|---|---|---|---|---|---|
| Strength | Base | About 2x annealed | About 4x annealed | Depends on plies | Same as base type |
| Breakage | Large sharp shards | Large pieces, stays in frame | Small blunt pieces | Held by the interlayer | As base type |
| Typical use | Mirrors, framed art | Laminated facades, spandrels | Doors, showers, partitions | Railings, overhead, security | Showers, back-painted walls, clear railings |
What we supply
One package from design-assist to closeout, so there is one team accountable for the result.
- Back-painted glass in any color
- Fluted, reeded and textured glass
- Writable glass walls and boards
- Mirrors and mirror walls
- Polished edges, cutouts and fixings
- Installation by licensed and insured partners
Options & specifications
Final systems, glass and finishes are confirmed per project in shop drawings and submittals.
| Colors | Any RAL or matched color, low-iron for true whites |
|---|---|
| Textures | Fluted, reeded, satin-etched, patterned |
| Edges | Polished, beveled or mitered |
| Fixing | Adhesive, clips or channels |
From plans to closeout
- Plans reviewSend drawings and specs. We review the scope, the wind zone and the code path, and list any questions.
- ProposalA priced proposal with the system, glass and finish, plus value-engineering options where they help budget or lead time.
- Engineering & approvalsShop drawings, structural calculations by a Florida-licensed PE, product approvals and samples for the architect's review.
- FabricationSystems are fabricated to the approved drawings and delivered to suit the site schedule.
- InstallationInstallation by licensed and insured partner crews, with our project manager on site. The permit is pulled by the contractor of record.
- CloseoutPunch list, warranties, as-builts and maintenance information handed over.
Our project · InternationalOur project · International
Our project · International
Our project · InternationalBack-Painted & Textured Glass: FAQ
Why use low-iron glass for back-painted walls?
Standard glass has a green tint that shifts light colors. Low-iron glass shows the true color, especially whites and pastels.
Can back-painted glass be used as a whiteboard?
Yes. Writable glass is easy to clean and does not ghost like a standard whiteboard.
Is back-painted glass durable?
Yes. The paint is protected behind the glass, and the front face is as easy to clean as any glass.
What is fluted glass?
Glass with a pattern of vertical ribs that blurs the view behind while letting light through, popular in hospitality design.
Request a Back-Painted & Textured Glass quote
Send the scope, drawings or a link to the bid set. We review it and reply with questions, a system proposal or a price.
- Free, no-obligation quote or bid
- Value-engineering options included
- Scope review by our technical team
- One point of contact from bid to closeout
Prefer to talk to our estimating team?